Self Aligning Ball Bearing - 2200
| Products
62 Series
All Bearings > Self Aligning Ball Bearings > 2200
2200
Self-aligning Ball Bearings are ideal for challenging shaft alignments and scenarios involving shaft bending, such as transmission shafts. Featuring a spherical raceway in the outer ring aligned with the bearing center, they enable free rotation of the inner ring, balls, and cage.
Brand
NBK
Cage Material
Steel
Bearing Industry Number
2200
Closure
Customizable
Bore Diameter
10 mm
Number of Rows
2
Bore Diameter Tolerance
+0 / -0.007 mm
Maximum Temperature
100°C / 212°F (Customizable)
Outside Diameter
30 mm​
Minimum Temperature
-30°C / -22 °F (Customizable)
Outside Diameter Tolerance
+0 / -0.009 mm
Dynamic Radial Load Capacity
9620 N
Outer Ring Width
14 mm
Static Radial Load Capacity
1930 N
Fillet Radius
0.6 mm
Maximum Speed
17000/20000 rpm (Grease/Oil)
Ring Material
AISI 52100
Lubricant Material
Grease or Oil
Ball Material
AISI 52100 (Steel) / Si3N4 (Ceramic)
ABEC Rating
3 (Customizable)
Key Features:
- Self-alignment capability
- Enables free rotation of the inner ring, balls, and cage around the bearing center.
- Accommodating dynamic misalignment of approximately 0.07 to 0.12 radians (4 to 7 degrees) under normal loads.
- Suitability for challenging installations
- Ideal for applications prone to shaft bending and where aligning the shaft and housing is difficult (such as transmission shafts).
Applications:
- Transmission shafts
- Gearboxes and speed reducers
- Agricultural machinery
- Industrial equipment prone to shaft misalignment
Full Catalogs
