Self Aligning Ball Bearing - 2302
| Products
62 Series
All Bearings > Self Aligning Ball Bearings > 2302
2302
Self-aligning Ball Bearings are ideal for challenging shaft alignments and scenarios involving shaft bending, such as transmission shafts. Featuring a spherical raceway in the outer ring aligned with the bearing center, they enable free rotation of the inner ring, balls, and cage.
Brand
NBK
Cage Material
Steel
Bearing Industry Number
2302
Closure
Customizable
Bore Diameter
15 mm
Number of Rows
2
Bore Diameter Tolerance
+0 / -0.007 mm
Maximum Temperature
100°C / 212°F (Customizable)
Outside Diameter
42 mm​
Minimum Temperature
-30°C / -22 °F (Customizable)
Outside Diameter Tolerance
+0 / -0.009 mm
Dynamic Radial Load Capacity
11200 N
Outer Ring Width
17 mm
Static Radial Load Capacity
2730 N
Fillet Radius
1 mm
Maximum Speed
12000/15000 rpm (Grease/Oil)
Ring Material
AISI 52100
Lubricant Material
Grease or Oil
Ball Material
AISI 52100 (Steel) / Si3N4 (Ceramic)
ABEC Rating
3 (Customizable)
Key Features:
- Self-alignment capability
- Enables free rotation of the inner ring, balls, and cage around the bearing center.
- Accommodating dynamic misalignment of approximately 0.07 to 0.12 radians (4 to 7 degrees) under normal loads.
- Suitability for challenging installations
- Ideal for applications prone to shaft bending and where aligning the shaft and housing is difficult (such as transmission shafts).
Applications:
- Transmission shafts
- Gearboxes and speed reducers
- Agricultural machinery
- Industrial equipment prone to shaft misalignment
Full Catalogs
